Mechanism for wardrobe-bed SMART bed (it is recommended to use a mattress up to 35kg

The transformation mechanism for wardrobe beds is based on the balance of the weight of the folding part of the product. If it is a vertical wardrobe bed, then the weight will be distributed along the longer part of the bed, and if it is horizontal, then along the shorter one. In each case, the mechanism is guaranteed to provide the ability to open the bed with minimal effort.
The choice of mechanism for the wardrobe of the bed depends on its size. Each of the types of fittings is distinguished by its own characteristics and unique characteristics in terms of the dynamic load of lifting mechanisms. That is why each type of transformation mechanism is recommended for use for a specific type of bed.
The transformation mechanism can be installed both along the short side of the product, and along the long one. In the first version, it is a wardrobe-bed; in the second, it is a dresser-bed.

The lifting bed can be up to 1200 mm wide and up to 2000 mm long.

The transformation mechanism for the wardrobe bed is made of steel sheet 3 mm thick and is completed with two pneumatic stops (gas springs). And also equipped with two needle bearings for more reliable operation.

Security measures: The
wardrobe bed must be fixed to the wall.
For normal operation, the wardrobe bed must be positioned vertically and horizontally.
When raising (lowering) the bed, it is allowed to be only on the right or left.
A feature of the mechanisms on gas springs is that in the vertical position of the bed, the bed must be fixed with special locks that prevent the bed from falling out of the closet.
Delivery across Ukraine.