A set of fittings for a wardrobe-bed 2000x1600 on gas lifts (Ukraine)

A set of fittings for a wardrobe-bed 2000x1600 on gas lifts (Ukraine)
A set of fittings for a wardrobe-bed 2000x1600 on gas lifts (Ukraine) - photo 1
A set of fittings for a wardrobe-bed 2000x1600 on gas lifts (Ukraine) - photo 2
A set of fittings for a wardrobe-bed 2000x1600 on gas lifts (Ukraine) - photo 3
14 921.00 грн
Артикул: 
SM830
Set:
1) the mechanism of transformation on gas lifts Jupiter
2) reinforced lamella block 2000x1636mm
3) a set of folding legs, with a connector
4) a set of straps to hold the mattress
5) a set of fasteners for the mechanism and lamella block
6) latches - latch - 2pcs
7) instructions for adding a mechanism with an example of a bed miscalculation
Particleboard and mattress are not included
The set is SUITABLE FOR the manufacture of WARDROBE BEDS WITH SOFA. SOFA LINK.
The size of the berth can be from 800 to 1600mm in width, 1900-2000mm in height, a table with prices below
The set of fittings is suitable for making a vertical or horizontal bed
The minimum dimensions of the product with a berth 2000x1600mm
 -width- 1742mm
 -height- 2130mm
 - depth - 350mm
 - length in unfolded position - 2190mm
Mechanism production - Ukraine.
It is recommended to use a mattress weighing up to 30kg
The recommended weight of the raised berth is up to 100kg
The total load on the mechanism, taking into account the weight of users, is up to 300 kg
Weight of a set of accessories 38kg
Sending across Ukraine by operator New mail
Special conditions for dealers.
When purchasing you will receive: 

Delivery in Ukraine

Warranty 24 months

Installment 0%

Video: 

Product description: 

The set of accessories uses a mechanism for gas lifts, Ukrainian production, Jupiter. These mechanisms are suitable for use in both single and double beds, the force of the mechanism is determined by the power of the gas lift. The movement is made of 5mm steel and equipped with a needle roller bearing. The frame is completely welded, not collapsible, the pipe thickness is 50x25mm. Angles for fastening the facade are welded along the perimeter of the frame.
The assembly of the bed cabinet on this set of fittings includes the following sequence:
- assemble the cabinet body and attach it to the wall
- attach the mechanism to the cabinet posts and screw the lamellar block to it.
- install gas lifts on the mechanism
- attach the facade to the lamellar block, screw the locking bar on the inside of the bed, and, depending on the location of the facade relative to the lamellar block, make a hole in the frame for attaching the leg and screw it on, after which the bed is ready for use.

Table: 
Price for a set of fittings with a 213mm leg, folding with a connector 2000х800 mm 2000х900 mm 2000х1200 mm  2000х1400 mm 2000х1600 mm
mechanism 12101UAH 12215UAH 14285UAH 14583UAH 14921UAH