Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm)

Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm)
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 1
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 2
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 3
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 4
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 5
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 6
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 7
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 8
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 9
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 10
Mechanism for wardrobe bed MLA218 Italy (depth 250-300mm) - photo 11
Артикул: 
SM505

Dimensions: 440x100x250
Weight: 15kg
Made in Italy.
Special prices for manufacturers and dealers.
DELIVERY ACROSS UKRAINE

Lifting mechanism for wardrobe-bed MLA series
Suitable for beds with a width of 800mm - 1200mm The
price is indicated only for the mechanism, it is recommended to use a mattress weighing up to 35kg.
Kit: left / right half, instructions.
For a wardrobe bed with a depth of 250-300mm!

When purchasing you will receive: 

Delivery in Ukraine

Warranty 24 months

Installment 0%

Product description: 

New!
The mechanism is designed for the weight of the bed base up to 100 kg. The geometrical dimensions of the mechanism are 170 mm wide and make it possible to make a wardrobe bed with a depth of 250-300 mm. The left and right parts of the lifting mechanism represent a collapsible body, the two parts of which are fastened with a metal bracket. The lifting force of the bed is provided by a set of 4 coil springs on each side. The spring force is adjusted with the adjusting screws.

Transformation mechanism for single bed wardrobe vertical type. Series 218. Used to open and close the wardrobe of a single bed.
The advantage of the 218 series mechanism is that the bed can be made with a depth of about 250-300mm. If this is not critical, then the MLA 108.1
lifting mechanism for a vertical folding bed with a small cabinet depth may well be suitable .

Mechanism load up to 70 kg (similar to MLA 108/2)
Mechanism thickness (gap between the side of the bed and the side of the wardrobe) 40 mm
The mechanism for the wardrobe 108 series has gained popularity for the following reasons:

1. Easy to install, configure and debug.
2. The ability to fine-tune the power of the bed cabinet mechanism in a narrow range without replacing the springs and disassembling the entire bed cabinet structure;
3. Affordable price of fittings for wardrobe beds;
4. Exceptional reliability and ease of implementation;
5. Availability of a detailed scheme of the additive mechanism for transforming the wardrobe of the bed. The mechanism is supplied with instructions in Russian. To receive it, write a request to us by e-mail or ask to print it in the store;
6. Mechanisms of the 108 series are the same in appearance, have the same scheme of additives and drilling, the technological holes are the same, but have different characteristics in terms of power, thus simplifying the process of serial production of the wardrobe.

In our Internet store of wardrobes, beds and accessories, you will find the largest assortment of all types of transformation mechanisms at affordable prices and you can buy them in Kiev or order delivery in any other city of Ukraine.
...
Due to the instability of the exchange rate, the prices are recalculated at the time of the change in the euro exchange rate.
When paying by cash on delivery, the client pays the commission for the transfer of funds.

Table: 
Mattress dimensions 2000mm X  900 mm 1000 mm 1200 mm  1400 mm 1600 mm 1800 mm 
 mechanism MLA 209
vertical bed  Yes
horizontal bed Yes Yes Yes
 mechanism MLA 218
vertical bed  Yes Yes
horizontal bed Yes Yes Yes
 mechanism MLA 400
vertical bed 
horizontal bed Yes Yes